The TorkLift PowerArmor Solar Locking Battery Box part # TLA7700LS is not wide enough to fit two group 31 batteries. Group 31 batteries are 13" long by 6.72" wide by 9.44" tall.
The only option that's big enough is the Commercial Grade Battery Box # 329-HM485. This is designed for dual 8D batteries which are a bit bigger, but it will work well with your two group 31 batteries.
If you're set on a solar powered battery box, the only other option is to use a TorkLift PowerArmor battery box,... view full answer...
Per manufacturer the TorkLift HiddenPower Under-Vehicle Battery Mount with Battery Box, # TLA7726 is approximately 8.5" center-to-center across and 3.5" center-to-center vertically. The battery box does have vents and allow cables to pass through for connection to terminals. The battery box is held in the tray with a strap. This is designed to fit the 2010 - 2014 Ford F-150 SuperCab or SuperCrew with a 6-1/2 Foot Bed view full answer...
The TorkLift PowerArmor Locking Battery Box for 6V and 12V Lithium Batteries #TLA7700L is designed for Lithium batteries. Lithium batteries are typically taller and more narrow so this battery box is designed to better support that size.
The box features two sections inside the box to hold two batteries and each area measures 13-3/8 inches x 7-1/4 inches with a height/depth of 10 inches.
I looked up the Battle Born Lithium batteries and the largest size battery was 12-3/4 inches x 6-7/8... view full answer...
I spoke to my contact at TorkLift about the TorkLift HiddenPower Under-Vehicle Battery Mount with Battery Box part # TLA7740 and they informed me that you would not be able to mount two 6 volt batteries side by side in the box due to the limited length. Unfortunately, the bracket is not sold separately from the box.
I have attached a photo with the internal dimensions of the above battery box for you but for an option that will allow you to mount two 6 volt batteries side by side, I recommend... view full answer...
I went out to the warehouse and pulled the Vented Battery Box, # DW03188, and produced a short video showing the dimensions of the box for you, see link.
The inside dimensions of the box with the lid removed are 8-1/4 inches long, by 5-1/4 inches wide at the bottom of the inside of the box, and 6-1/8 inches deep.
The overall outer dimensions of the battery box are 10-1/2 inches long, by 7-3/8 inches wide, by 9-1/4 inches high, with the lid on the box.
You may also be interested in the... view full answer...
I went out to the warehouse and pulled the Vented Battery Box, # DW03009, and produced a short video showing the dimensions of the box for you, see link.
The inside dimensions of the box with the lid removed are 10-3/4 inches long, by 7 inches wide at the bottom of the inside of the box, and 8-1/4 inches deep.
The overall outer dimensions of the battery box are 14-1/4 inches long, by 9-3/4 inches wide, by 10-3/8 inches high, with the lid on the box.
You may also be interested in the... view full answer...
We do have a battery box though the Curt battery box you referenced does not have the correct length for your battery, which is just over 5-3/4" long. Instead, you will need the Replacement Clamp-On Battery Box for Tekonsha Trailer Breakaway Kit # TK2018 because it measures 5-15/16" long x 5-1/16" tall x 3-3/8" wide.
I have added a link to a video review of this battery box for you to check out as well. view full answer...
My recommendation is to use the Deka Battery Box Vented- U1, # DW03188. It has inside dimensions with lid removed: 8-1/4" L x 5-1/4" W x 6-1/8" D. All of our battery boxes are slightly smaller or way larger than your battery dimensions, so this one will allow some room, but still be functional for you. view full answer...
We do have several battery boxes, but none with the exact dimensions you have listed. We have smaller break away battery boxes like the Replacement Battery Box for Breakaway Kit, # 34420215, which will accept a battery that is 3-1/2 inches x 2-3/4 inches and 4 inches tall. And the Hopkins box you have referenced is 5-5/8 inches Wide x 5-1/8 inches Tall x 4-1/8 inches Deep.
But we also have larger battery boxes which I have listed below.
Battery Box Vented - U1, # DW03188: 10-1/2 inches... view full answer...
Internally the box of the Curt breakaway part # C52090 is 5-7/8 inches wide, the width is 3 inches, and the height is 5-3/16 inches. So it would seem to still be too small for your battery. You'd have to go with a larger battery box like the # DW03009 which has internal dimensions of 10-3/4" long x 7" wide x 8-1/4" deep. view full answer...
The external dimensions of the battery box that comes with the TorkLift HiddenPower Under-Vehicle Battery Mount with Battery Box part # TLA7726 are 14" long x 10-11/16" tall x 10" wide. view full answer...
We do have several battery boxes, but none with the exact dimensions you have listed.
The closest battery box to your stated dimensions we offer would be part # DW03188. The inside dimensions of the box with the lid removed are 8-1/4 inches long, by 5-1/4 inches wide at the bottom of the inside of the box, and 6-1/8 inches deep.
The overall outer dimensions of the battery box are 10-1/2 inches long, by 7-3/8 inches wide, by 9-1/4 inches high, with the lid on the box. I have included... view full answer...
The Tekonsha Push to Test Breakaway Kit, # 50-85-313, is large enough to house a 12 volt battery like # UB1250, which is 3-1/2 inches x 2-3/4 inches x 4 inches. The box will be slightly larger then this in order to accommodate the battery. The box is this particular kit is not available as a stand alone item, but we do have others that are.
Take a look at the Replacement Battery Box for Breakaway Kit, # 34420215. This box will be the same size as the one listed above. We also have Replacement... view full answer...
The dimensions of the TorkLift PowerArmor Locking Battery Box # TLA7708R measures 26-3/4" x 8-3/16" x 13. You could pretty easily fit two batteries in the box, but you would need to check the dimensions of the batteries first. view full answer...
I contacted the manufacturer and the TorkLift PowerArmor Locking Battery Box, Item # TLA7710R, has outside dimensions of the box are 58-1/2 inches long x 8-3/16 inches wide x 13 inches deep. The inside dimensions will be approximately 1/4 inch less all the way around. The box includes 5 battery hold-down straps, adjustable divider, and mounting hardware. It also has a sturdy lid that locks while providing quick and easy access. The TorkLift Battery Box is also made in the USA. view full answer...
The battery that fits in box # TN65117 measures 3.54 inches long, 2.76 inches wide, and 3.93 inches tall. Including the terminals it is 4.17 inches tall. A battery that is at most these dimensions or smaller would fit in the box. It is designed as a replacement for Titan breakaway kit # T4822100. I have included a link to other battery boxes that we carry. view full answer...
The Replacement Clamp-On Battery Box, # TK2018, is going to be too small for your batteries. It measures approximately 5-1/4 inches across, 3 inches wide, and 4-7/8 inches tall on the inside.
Instead take a look at the more cost effective box # DW03009. The inner dimensions are 10-3/4 inches long, 7 inches wide, and 8-1/4 inches deep. Installation hardware is also included with this box. view full answer...
The dual battery box part # 329-HM426 would fit two of the Go Power Sun Cycle Solar RV Battery # 34277606 that you referenced. The outside dimensions of the box are also compatible with the space you mentioned having as well. view full answer...
The TorkLift PowerArmor DH Locking Battery Box TLA7707 that you referenced has been discontinued, but we do have a battery box with similar internal dimensions.
The TorkLift PowerArmor Locking Battery Box # TLA7708R has the following internal dimensions: 26-1/2" long x 7-3/8" wide x 12-9/16" tall. As far as the outside dimensions go they are: 26-3/4" long x 8-3/16" wide x 13" tall. This is the smallest battery box that we have which can hold 2 batteries.
It also has the option to add... view full answer...
The TorkLift HiddenPower Under-Vehicle Battery Mount, # TLA7729, includes a battery box that works with group 24 to 31 batteries. This box has an interior dimension of 14-1/2 x 7-7/8 x 9-3/4 inches and an exterior dimension of 17-3/8 x 9/3/4 x 10-5/8 inches. view full answer...
Go To Results